Optical and structural properties of Sn and Ag-doped PbS/PVA nanocomposites synthesized by chemical bath deposition.

In this work, Sn and Ag doped PbS/PVA nanocomposites, in three different concentrations were successfully prepared using the low-cost and simple method of chemical bath deposition (CBD). X-ray diffraction patterns confirmed the formation of the PbS cubic phase in all of the nanocomposites. FE-SEM images showed that PbS NPs are cubic in shape and the doping can alter the shape of grains. DLS analysis applied for solution NPs exhibited a 175 nm size distribution for PbS NPs and decreased by doping Ag and Sn to almost 100 nm and 110 nm, respectively. Optical absorption spectra showed the blue phenomena and the band gaps of Sn: PbS/PVA and Ag: PbS/PVA nanocomposites increased with adding Sn and Ag from 3.08 eV for pure PVA/PbS to 3.33 eV for Sn doped and 3.43 eV for Ag-doped samples. The nonlinear refractive index is decreased from 0.55 m2 W-1 for pure PVA/PbS to 0.11 m2 W-1 and 0.13 m2 W-1 for Sn and Ag-doped samples, respectively. Hence, doping Ag and Sn enhanced the optical sensitivity issue of nanocomposites and raised the optical resistivity. Collectively, our results can be useful in the design of linear and nonlinear optical devices such as sensors and optical switches and limiters.

CuO-decorated ZnO nanotube-based sensor for detecting CO gas: a first-principles study.

Understanding the effect of copper oxide (CuO)-decorated zinc oxide nanotube on carbon monoxide (CO) adsorption is crucial for designing a high-performance CO gas sensor. In this work, CO sensing properties of copper oxide-decorated zinc oxide (CuO-ZnO) nanotube are studied theoretically by employing first-principles density functional theory for the first time. The stability, adsorption mechanism, density of states, and change in electrical conductivity are studied. The results of calculating the adsorption energy show strong chemical adsorption of CO on CuO-ZnO nanotubes. The adsorption energy of CO on CuO-ZnO nanotube is calculated as 7.5 times higher than that on ZnO nanotube. The results of the Mulliken charge analysis reveal that electron transfer occurs from CO molecules to CuO-ZnO nanotubes. Additionally, the electrical conductivity of CuO-ZnO nanotubes significantly changes after adsorption of CO at room temperature. According to these studies, CuO-ZnO nanotube sensors can be used for the detection of CO gas. The results are in excellent agreement with the reported experimental results.